Homeowner documenting a motorized louvered pergola component from ground level for a support request

How to Request FlexPatio Pergola Support in the US

PERGOLA OWNERSHIP

To request FlexPatio pergola support in the US, identify your installed configuration, describe the observed problem and gather clear photographs taken from safe positions. Use the US contact page for the current support route. For a warranty claim, follow the written policy’s email process and deadline; a phone conversation or general inquiry is not a substitute for the required submission.

Swipe the table sideways, or focus it and use the arrow keys.

Include Make the information specific
System Order reference, model, size, finish and later changes.
Location Roof, light or a named side of the pergola.
Observation What you expected and what actually happened.
Evidence Overall view, component view and a safely accessible label.
Next step The inspection or information requested by support.

Identify the installed configuration

Start with the original order, matching manual and any later accessory or replacement records. A product name can span more than one configuration. Do not order a replacement by appearance or nominal pergola size alone.

The reviewed US 10-by-10-foot, four-inch-post, gray freestanding manual includes a parts list. Use the list from your own matching document to help describe a component. A diagram reference is useful context, but support should confirm the actual replacement part and compatibility before an order.

Describe the symptom before proposing a cause

Write a short sequence: which normal control was used, which component was expected to respond and what was observed. For example, “The garden-side screen did not move during the usual operation” is more useful than immediately declaring that its motor has failed.

Record when the issue first appeared, whether it followed any known change and whether other functions behaved normally. Do not repeatedly operate a visibly damaged or abnormal mechanism to make a video. Leave diagnosis to the appropriate support or service professional.

Use three levels of photographs

An overall view locates the affected side. A closer view shows the component in context. A readable label or detail, if safely accessible, helps identify it. Name sides using fixed references such as the house or garden and keep that terminology in the message.

Take photographs from safe positions without removing covers, climbing on the structure or opening electrical equipment. If the relevant detail cannot be reached safely, say so. Support can decide whether a qualified inspection is needed. Avoid including unrelated personal information in the images.

Choose the correct support route

FlexPatio’s US contact page separates pre-purchase questions from help with an order or product. Use the customer-support route for an installed pergola. Keep the order and component information available even if your first contact is by phone.

The US policy checked on November 12, 2026 requires written warranty claims to support@flexpatio.com within 30 days of discovering the defect, with purchase evidence, an invoice, installation photos and defect photographs. Read the current policy promptly and follow the applicable process.

The policy provides for inspection before repairs. Do not alter the product to demonstrate a suspected fault. Ask for the appropriate next step and retain the reply. This guide does not promise coverage, replacement availability, labor costs or response times.

Turn observations into a concise message

A useful subject identifies the order and affected function. In the message, give the model and configuration, the location of the issue, when it first appeared, the normal action taken and the result. Add the attached views and the help you are requesting. Keep a suspected cause separate from those observations.

An illustrative description could read: “The garden-side screen did not move during the normal operation shown at handover. The light still responded. I have attached an overall view and a close view from ground level. Please advise what identification or inspection you need before I consider a replacement.” This is example wording, not a customer case or a diagnosis.

Describe only what you actually observed. Do not recreate a fault by repeatedly operating a damaged mechanism or by opening an electrical housing. If a label or component is inaccessible, explain that limit so support can decide whether a qualified inspection is needed.

Keep the response with the evidence

Save the case reference, supplied records and the requested next action together. If a replacement is proposed, confirm the exact part, affected side, installation responsibility and relevant instructions before proceeding.

A concise initial message can follow this order: system identification, observed symptom, first noticed date, attached views and the help requested. It gives support a practical starting point while keeping uncertainty visible instead of turning a guess into a diagnosis.

Frequently asked questions

Where should I send a US warranty claim?

Use support@flexpatio.com for the written claim, following the current US policy’s required process.

How quickly should I report a discovered defect?

The reviewed policy says within 30 days of discovery. Check the applicable terms and contact support promptly.

Should I order a replacement from a matching photograph?

No. Identify the installed configuration and relevant part reference, then have compatibility confirmed. Similar appearance or the same nominal pergola size is not enough to identify a replacement.

What photos are useful if I cannot reach the part safely?

Provide an overall view and whatever contextual detail can be photographed safely. State that the label or component is inaccessible. Do not climb onto the structure or remove electrical covers for a photograph.

Does submitting a request guarantee a free replacement?

No. Sending information starts an assessment; it does not determine your claim’s outcome.

Use the plan with your FlexPatio order

Send the appropriate request through the current US support route, keep a copy and save the case reference with the product documents. For broader purchase and ownership questions, use the linked FlexPatio ownership guide. This article focuses on assembling a useful report when a specific issue has appeared.

Back to blog